Board foot calculator

This board foot calculator (a board feet calculator for your whole lumber list) adds up every board. Enter each board to get the total board feet, the amount to buy once you add waste, and the cost at your yard's price per board foot. Thickness can be in quarters (4/4, 8/4) or inches.

QtyThickWidth (in)Length (ft)Board feetBFRemove

Length measured in
$
%

Thickness accepts 4/4-style quarters, decimals (1.5) or fractions (1 1/2). Use the size the lumber is sold by.

0board feet in your list

  • 0board feet to buy with waste
  • –estimated cost
  • 0linear feet, 0 pieces
  • 0cubic feet (0 m³)

How to use the board foot calculator

  1. Enter one row per board size. Put the number of identical pieces in Qty, then the thickness, width and length.
  2. Type thickness the way the yard sells it. For hardwood that is quarters, so 4/4 for one inch and 8/4 for two. For construction lumber use the nominal size, so a 2x6 is 2 thick and 6 wide.
  3. Pick feet or inches for length. Most lumber is sold by the foot, but cut lists are usually in inches. The calculator converts either way.
  4. Add your price per board foot to see the cost, and set a waste allowance so you order enough to cut around knots, checks and snipe.
  5. The shop drawing redraws the row you are editing to scale, so a typo like 96 feet instead of 96 inches is easy to spot.

What is a board foot?

A board foot is a unit of lumber volume: 144 cubic inches, or a piece of wood 1 inch thick, 12 inches wide and 12 inches long. Any board with the same volume is also one board foot, so a 2-inch-thick board that is 6 inches wide and 12 inches long counts the same as the 1 by 12 by 12 square.

Three boards that each hold one board foot: 1 inch by 12 inches by 12 inches, 2 inches by 6 inches by 12 inches, and 1 inch by 6 inches by 24 inches
Three shapes, one board foot each: thickness × width × length always comes to 144 cubic inches.

Hardwood dealers and sawmills price hardwood lumber and rough lumber by the board foot because boards come in random widths and lengths. Measuring volume lets a yard price a stack of mixed boards fairly, and it lets you compare a wide walnut slab against a pile of narrow boards.

Board foot formula

Measure thickness and width in inches. With the length in feet, divide by 12. With the length in inches, divide by 144. The board foot formula works for any piece of lumber:

Board feet = thickness (in) × width (in) × length (ft) ÷ 12

Board feet = thickness (in) × width (in) × length (in) ÷ 144

Then multiply by the number of pieces to get the total board footage for multiple boards. Worked example: you need six 4/4 cherry boards, each 7 inches wide and 8 feet long. One board is 1 × 7 × 8 ÷ 12 = 4.67 board feet, so six boards are 28 board feet. With 20% waste, buy about 33.6 board feet.

Reading lumber thickness: the quarter system

Hardwood thickness is quoted in quarters of an inch. The quarter number is the rough-sawn thickness, and board feet are figured on it even after the board is planed. When a yard sells surfaced lumber (S2S, surfaced two sides), you pay for the rough quarter thickness but take home less.

Hardwood quarter thickness and typical surfaced thickness
QuartersRough thicknessTypical S2S thicknessBoard feet per foot of a 6 in wide board
4/41 in13/16 in0.50
5/41¼ in1 1/16 in0.63
6/41½ in1 5/16 in0.75
8/42 in1 3/4 in1.00
10/42½ in2 1/4–2 3/8 in1.25
12/43 in2 3/4 in1.50
16/44 in3 3/4 in2.00

Nominal vs actual size: how many board feet in a 2x4?

Softwood construction lumber is sold by nominal size. A 2x4 actually measures 1½ by 3½ inches, but board feet are still figured as 2 by 4. That makes a 2x4 worth 0.667 board feet per linear foot.

Board feet in common dimensional lumber (nominal size)
SizePer foot8 ft10 ft12 ft16 ft
1x40.332.673.334.005.33
1x60.504.005.006.008.00
2x40.675.336.678.0010.67
2x61.008.0010.0012.0016.00
2x81.3310.6713.3316.0021.33
2x101.6713.3316.6720.0026.67
2x122.0016.0020.0024.0032.00
4x41.3310.6713.3316.0021.33

Use actual measurements only when you are measuring your own boards, such as slabs from a sawmill or reclaimed lumber, where no nominal size applies.

Board feet vs linear feet vs square feet

To convert board feet to square feet for 1-inch stock, the numbers are equal. For other thicknesses, divide board feet by the thickness in inches.

How much extra to buy: the waste factor

Rough lumber always loses volume to jointing, planing, ripping off wane and cutting out knots, checks and end splits. The calculator's waste allowance adds that back so you order enough on the first trip.

Board feet to cubic feet and cubic meters

A cubic foot holds 12 board feet (1,728 ÷ 144). One board foot is 0.00236 cubic meters, and one cubic meter is about 423.8 board feet. The calculator shows both so you can compare prices with metric suppliers.

What about board feet in a log?

A log's board feet depend on how it is sawn, so foresters use log rules (Doyle, Scribner and International ¼-inch) that estimate the lumber a log will yield after kerf and slab losses. The formula above measures sawn boards, not standing trees or logs. Doyle in particular underestimates small logs, so check which rule a sawmill quotes before comparing prices.

Frequently asked questions

How many board feet are in a 2x4?

Board feet use nominal size, so a 2x4 has 2 × 4 ÷ 12 = 0.667 board feet per foot of length. An 8 ft 2x4 is 5.33 board feet, a 10 ft 2x4 is 6.67 and a 12 ft 2x4 is 8.

What does 4/4 mean in lumber?

Hardwood thickness is sold in quarters of an inch. 4/4 (four quarter) is 1 inch rough, 5/4 is 1¼ inch, 6/4 is 1½ inch and 8/4 is 2 inch. Board feet are figured on that rough quarter thickness even after the yard surfaces the board.

Do I use nominal or actual thickness for board feet?

Use the size the lumber is sold by: the rough quarter thickness for hardwood (4/4 = 1 inch) and the nominal size for softwood dimensional lumber (a 2x6 is figured as 2 by 6 inches, not 1½ by 5½). Only use actual dimensions when you are measuring your own rough-sawn boards.

What is the difference between a board foot and a linear foot?

A board foot is a volume: 144 cubic inches, the same as a board 1 inch thick, 12 inches wide and 12 inches long. A linear foot is just 12 inches of length, whatever the board's width or thickness. A 1x6 that is 1 linear foot long holds 0.5 board feet.

How many board feet are in a cubic foot?

There are 12 board feet in a cubic foot, because a cubic foot is 1,728 cubic inches and a board foot is 144 cubic inches. One cubic meter is about 423.8 board feet.

How do you calculate board feet with the length in inches?

Multiply thickness × width × length, all in inches, and divide by 144. A board 1 inch thick, 8 inches wide and 96 inches long is 1 × 8 × 96 ÷ 144 = 5.33 board feet.

How much extra lumber should I buy?

Add 15 to 20 percent for straight-grained rough lumber in a simple project, and 25 to 35 percent when you need matched grain, wide panels or clear stock, or when the boards have defects you will cut around.